180Watts Maximum x 2 (BTL) ? 4 / 3 / 2 Channel Power Amplifier ? 100 Watt RMS x 2 (4 ohm @ 14.4 Volt BTL 0.3% T.H.D) ? 50 Watt RMS x 4 (2 ohm @ 14.4 Volt 0.3% T.H.D) ? 40 Watts RMS x 4 (4 ohm @ 14.4 Volt 0.08% T.H.D)

· 4/3/2 Channel Operation

· High Temperature Protection

· Subsonic Filter

· Bass EQ Circuit

· Adjustable Crossover (HP/LP)

· MOSFET Power Supply

· DC-DC PWM Power Supply

· Discrete Pre-Amp Stage

· STAR Circuitry

· Auto Over-Current Protection

· MultiMode^TM

· Top Mounted Blue LED Power/Status Indicator

· Input Channel Selector

· Gold Plated RCA Input Connectors

· Continuously Adjustable Gain Control

· Speaker Level Inputs

· Gold Plated Power Screw Terminals

· Gold Plated Speaker Terminals

• 4-Layer Glass Epoxy PC Board

· 4/3/2 Channel Operation

· High Temperature Protection

· Subsonic Filter

· Bass EQ Circuit

· Adjustable Crossover (HP/LP)

· MOSFET Power Supply

· DC-DC PWM Power Supply

· Discrete Pre-Amp Stage

· STAR Circuitry

· Auto Over-Current Protection

· MultiMode^TM

· Top Mounted Blue LED Power/Status Indicator

· Input Channel Selector

· Gold Plated RCA Input Connectors

· Continuously Adjustable Gain Control

· Speaker Level Inputs

· Gold Plated Power Screw Terminals

· Gold Plated Speaker Terminals

· 4-Layer Glass Epoxy PC Board

CEA-2006 Power Rating
• CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 80dBA (Ref. 1W into 4Ohm): 40W x 4

RMS Power (at 14.4V THD+N, 20Hz-20kHz)

· Per channel into 4 ohms: 40W x 4 (0.08% THD)

· Per channel into 2 ohms: 50W x 4

• Brigded 4 ohms: 180W x 2

Bass Engine® Sound Tuning

· Crossover Frequency : 50Hz - 400Hz HP/LP/Off(-12dB/oct)

· Subsonic Filter (Fixed): 15Hz

• Bass EQ Frequency (Fixed): 50Hz +12dB (Ch-3/4) On/Off

Dimensions

· Heat Sink (WxHxD) in: 9-9/64" x 9-31/64" x 2-23/64"

· Heat Sink (WxHxD) mm: 232mm x 241mm x 60mm

· Foot Print (WxHxD) in: 10-15/16" x 9-31/64" x 2-23/64"

• Foot Print (WxHxD) mm: 279mm x 241mm x 60mm

General

· Power Requirements: 14.4V DC (11V to 16V)

· Fuse Type: 15A x 2

· Frequency Response: 10Hz - 50kHz (+0,-1dB)

· Signal to Noise (S/N): 100dBA (Reference to Rated Power)

· Input Sensitivity (For Rated Power): 0.2V to 4.0V (1.0 at Center Detent)

· Input Impedance: 10k Ohm

· Speaker Impedance: 4 or 2 ohm Bridged

• Weight: 2.7 Kg.