220 Watt Max x 4 ? 4 / 3 / 2 Channel Power Density Digital Amplifier ? Class D Circuit ? 150 Watt RMS x 4 (2 ohm@4 ohm @ 14.4 Volt 1% T.H.D) ? 300 Watt RMS x 2 (4 ohm @ 14.4 Volt 1% T.H.D)? Low Resistance, High Current Speaker Terminals  

· Class-D

· 4/3/2 Channel Operation

· Stackable Installation Design

· Thermal Management Processor

· Adjustable Crossover (HP/LP)

· MOSFET Power Supply

· DC-DC PWM Power Supply

· MOSFET Final Outputs

· STAR Circuitry

· Auto Over-Current Protection

· Top Mounted Blue LED Power/Status Indicator

· Integrated Wire and Mounting Screw Terminals

· Input Channel Selector

· Input Mode Selector Switch

· One Side Terminal Layout

· Gold Plated RCA Input Connectors

· Continuously Adjustable Gain Control

· Gold Plated Power Screw Terminals

· 4-Layer Glass Epoxy PC Board

• Speaker Quick Connect

CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 78dBA (Ref. 1W into 4Ohm):

· 150W x 4

RMS Power (at 14.4V THD+N,20Hz-20kHz)

· Per channel into 2 ohms : 150W x 4 (<=1%THD+N)

· Per channel into 4 ohms : 150W x 4 (<=1%THD+N)

· Brigded 4 ohms: 300W x 2 (<=1% THD+N)

Dimensions

· Heat Sink (WxHxD) in: 10-1/8" x 7-9/16" x 2-7/16"

· Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm

Bass Engine® Sound Tuning

· Crossover Frequency : 1/2Ch + 3/4Ch, 30Hz-400Hz HP/LP/Off (-12dB/oct)

General

· Frequency Response: 20Hz - 20kHz (+0,-1dB)

· Signal to Noise (S/N): 100dBA (Reference to Rated Power)

· Input Sensitivity (For Rated Power): 0.2V to 4.0V (1.0 at Center Detent)

· Input Impedance: 10k Ohm

· Power Requirements: 14.4V DC (11V to 16V)

• Weight: 3.11 Kg.