Highlights :

• Full mosfet class D power amplifier
• 2 input / mono channel input
• Low current consumption
• Low heat generation (performance more than 85%)
• Fully 1 ohm stable operation
• Two speakers operation
• RCA line out and input jack
• Crossover slope (24dB per Oct)
• Super bass control : 0-12db
• Variable subsonic flter (15Hz-40Hz)
• Variable low pass filter (40Hz-250Hz, 24dB per Oct)
• Wired remote control (optional 5 meter volume wire)
• Thermal, overload, short circuit and dc off-set protection
• Transparent power and speakers terminal
• 4 ohms maximum output @0.03% : 1800W RMS/1 ohm
• 4ohms bridget mono output @0.02% THD : 1200W RMS/2 ohms
• 2 ohms WRMS output @0.1 THD : 600W RMS/4 ohms
• Low pass filter : 40Hz - 250Hz
• Subsonic Filter : 15Hz-40Hz/Subsonic
• Frequency response : 20 - 500Hz
• Signal to noise ratio : 100dB
• Input sensitivity : 150mV - 2.5V
• Input impedance : 10Kohms
• Operation voltage : DC 12.4V
• Speaker impedance @ stereo driven : 1 Ohm Remote Control : Optional
• Fuse rating : 25Ax3
• Dimension (WHD) mm : 320x50x244