Mono Power Density Digital Amplifier ? 1000 Watt RMS x 1 ? 2 ohm & 4 ohm @ 14.4 Volt 1% T.H.D ? Low Resistance, High Current Speaker Terminals ? M2200 Watt Max x 1

Features :
***********************************

· Class-D

· 1 Channel (Mono) Operation

· Stackable Installation Design

· Thermal Management Processor

· Adjustable Crossover (LP)

· MOSFET Power Supply

· DC-DC PWM Power Supply

· Discrete Pre-Amp Stage

· MOSFET Final Outputs

· STAR Circuitry

· Auto Over-Current Protection

· Top Mounted Blue LED Power/Status Indicator

· Integrated Wire and Mounting Screw Terminals

· One Side Terminal Layout

· Gold Plated RCA Input Connectors

· Continuously Adjustable Gain Control

· Gold Plated Power Screw Terminals

· Non-Fading Pre-Amp Output

· 4-Layer Glass Epoxy PC Board

• Speaker Quick Connect

CEA-2006 Power Rating (40hm@14.4V = 1%THD+N), S/N 80dBA (Ref. 1W into 4Ohm):

· 1000W x 1

RMS Power (at 14.4V THD+N,20Hz-200Hz)

· Per channel into 2 ohms : 1000W x 1 (<=1%THD+N)

· Per channel into 4 ohms : 1000W x 1 (<=1%THD+N)

Dimensions

· Heat Sink (WxHxD) in: 10-1/8" x 7-9/16" x 2-7/16"

· Heat Sink (WxHxD) mm: 257mm x 192mm x 62mm

Bass Engine®

· Crossover Frequency : 50Hz-200Hz, -24dB oct (LP)

General

· Input Sensitivity (For Rated Power): 0.1 V to 8.0V

· Input Impedance: 10k Ohm

· Power Requirements: 14.4V DC (11V to 16V)

· Speaker Impedance: 4 or 2 ohm

· Frequency Response: 20Hz-200Hz (20Hz/-3dB)

• Signal to Noise (S/N): 110dBA (Reference to Rated Power)